GENERAL INSTRUCTIONS
Before using the machine, instruct all operators to read the chapter “SAFETY STAND-
ARDS”.
MANUFACTURER RESPONSABILITIES
The manufacturer FIORENTINI is not responsible for any inconvenients, failures, accidents,
etc. due to the non-acquaitance (or non-fulfilment) of the prescriptions contained in this ma-
nual. The same applies to change’s execution, modifications, and/or to the installation of ac-
cessory not preliminarly authorized.
In particular, the firm FIORENTINI is not responsible for any damages caused by:
- natural calamity
- erroneous operations
- no maintenance
Furthermore, the MANUFACTURER is not responsible for any interventions not performed
by authorized personnel.
SPARE PARTS
Use only ORIGINAL SPARE PARTS, checked and authorized by the manufacturer. Do not
replace the components after they become worn by the use; replacing a component in due
time allows for a better machine operation and a saving as well, because greater damages
will be avoided.
INTERVENTION REQUESTS
Possible intervention requests should be made after an accurate analysis of the inconve-
nients and their causes. In any case, when calling the technician, report what follows:
- Model of the machine
- Series number
- The detail of the detected faults
- The checks executed
- The performed adjustments and their results
- Any other information considered useful for this purpose
- Address the requests to the authorized customer service
WARNING
The manufacturer can make any changes to the machine, for constructive or commercial
reasons, without being obliged to change the instruction manual at the right time according
to these modifications.
GENERAL SAFETY STANDARDS
The machine described in this manual has been built according to the 89/392/CEE rule re-
garding the machines and to its subsequent modifications.
The person responsible for the machine must adhere to CEE rules and to the local stand-
ards as well, regarding the working environment for operators’ safety and health purposes.
Before starting the machine, always perform the preliminary checks. The safety standards
which involve any dangers, cited in the text of the manual, can be recognised by the sym-
bol:
CAUTION
Beyond the standard listed hereunder, the person responsible for the machine must comply
with the rules provided by the law in force regarding personnel’s safety and health in the
working stations. Furthermore, the person responsible for the machine must instruct the
operators on what follows:
- Safety and accident prevention standards
- Specific standards regarding the machines
- Position on the machine of the emergency pushbuttons or of similar mechanisms, for a
prompt operation. The fixed or movable protections (carters) should always remain in their
Summary of Contents for C190 100B
Page 9: ......
