USE OF THE MACHINE
CAUTION
SAFETY SYSTEM
WARNING: the machine is equipped with a safety system for “emergency stop”, constitued
by a mushroom push-button (fig.). In emergency case, press down this button. Before lear-
ning how to use the machine, the operator should be familiar with the use of this safety sy-
stem, to automatically use it in case of emergency. Never reset the safety system before
having solved the failure, if necessary with the help of a specialized technician.
fig. 5 fig. 6
BRAKE
The machine is provided with a parking and an emergency brake as well. The emergency
brake is controlled by a pedal located on the left-hand side of the footboard (fig.). To enga-
ge the emergency brake, press down the pedal and insert the block by means of the lever
(fig.) pressed downward. CAUTION: the brake should be checked and adjusted at least
once every three months.
PREPARING THE MACHINE FOR OPERATION
Upon delivery of the machine, remove the packing without damaging it. It can be re-used for
any possible long displacements of the machine. Check immediately the machine state, and
in case of damages due to the transport, contact the trucking company to file a freight
damage claim. Before starting the machine, read carefully the contents of this manual, in
particular the safety standards.
INSTALLING THE BATTERIES
Install the batteries on the proper compartment. Inspect batteries carefully before installing,
thus making sure that there are no cracks in the cases. Never add electrolyte if batteries
have been in use for one week or longer. For positive connections of the batteries, the sur-
faces which get in contact with them should be clean. Apply a film of grease of vaseline to
terminal clamps or connections. During transit, the batteries may have lost some of their
charge. If so, give a freshening charge before operating the machine.
Summary of Contents for C190 100B
Page 9: ......
