STARTING AND USE INSTRUCTIONS
Ecosmile
Rev. 000
29/11/2012
28/38
4.7.7 SQUEEGEE BLADES REPLACEMENT
The squeegee blades (figure 4.18) must be replaced when the contact edge is abrasive: in fact, edge
perfection is essential for perfect drying.
To replace the blades, do as follows:
Remove the squeegee from the machine and position it on a bench (fig.4.17 detail 1).
Remove the knobs on both the front and back part of the squeegee unit (fig.4.17 detail 2), remove
the strips (fig.4.17 detail 3) and remove the worn blades (fig.4.17 detail 4)
Insert the new blades and proceed with the inverse operations.
If worn, change the bumper wheels by removing the plug (fig.4.17 detail 5) and then unscrewing the
hex head screw (fig.4.17 detail 6).
PICTURE N° 4.17
1
2
3