STARTING AND USE INSTRUCTIONS
Ecosmile
Rev. 000
29/11/2012
27/38
4.7.6 BRUSHES REPLACEMENT
To proceed with replacing the brushes, you must do as follows:
Remove the key from the commands dashboard to avoid accidental switch on.
Replace the brush by rotating it (detail 1 fig. 4.15) and then removing it (detail 2 fig. 4.15).
To insert a new brush, position it under the flange and subsequently lift it until it is inserted in the
aforementioned flange (detail 3 fig.4.15); after which rotate it.
Using this adjustment (detail 4 fig.4.15) you can determine the inclination of the brushes plate while
the machine is stopped.
1
2
PICTURE N° 4.16
3
4