6
Step 1
Locate the Troubleshooting Tool behind the
manual on the back of the car seat, as shown
in
Figure 1
.
Step 2
Raise Headrest to highest position by
pressing and holding Headrest Adjuster
button while lifting up on Headrest.
Step 3
Insert trouble shooting tool into the small hole
in the front of the Headrest Guide on the
left side of the seat as you are facing it, as
shown in
Figure 2
.
Step 4
Push in on the Troubleshooting Tool and the
Headrest Adjuster button and hold both in
while pulling up on the Headrest, as shown
in
Figure 3
.
Note:
A paper clip or other small object
may be used if the Troubleshooting Tool is
not available.
IMPORTANT:
Car seat Headrest MUST be
installed if using the car seat without the
Head Support.
Figure 3
Figure 2
Figure 1
