13
SHOULDER HARNESS RETHREADING
Step 1
Check that Harness Straps are not twisted
and, from front of seat, insert Shoulder
Harness Straps through the chosen Shoulder
Harness Slots as shown in
Figure 17
. Straps
MUST go through the Shoulder Harness Slots
at the same height on each side.
Step 2
Route Shoulder Harness under bottom of seat
back cover (
1
) as shown in
Figure 18
.
Step 3
Attach desired loops at end of Shoulder
Harness Straps to Metal Harness Plate by
sliding strap into slot in plate as shown in
Figure 19
.
NOTE:
The loops which are located further
in from the end of the Shoulder Harness
Straps will provide better fit for infants
using the Infant Insert.
Figure 17
1
Figure 18
Figure 19
