Technical Parameters
1. Standard Protocol: IEEE 802.3u 100 Base-TX, IEEE802.3z,
IEEE802.3ab standard, IEEE802.3at/af
2. Ports: one UTP RJ-45, one SFP, one AC-inlet port
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter: 100-240V AC
5. Environmental temperature: 0-50°C
6. Relative humidity: 5%-90%
7. TP cable: Cat5 UTP cable
8. Optical fiber:
Multimode: 50/125, 62.5/125 or 100/140μm
Single Mode: 8.3/125, 8.7/125, 9/125
9. Dimensions: 140mm(L) x 110mm(W)x40mm(H)
Warnings:
1. This product is suitable for indoor applications only.
2. Install dust cover on SFP port when not in use.
3. Do not look into TX fiber-transfer side when active. Eye
damage may occur.
4. Single optical fiber transceivers must be used in a pair.
Troubleshooting
1. Device is not matched: Select the corresponding network
device according to the transfer rate of the product
(10Mbps, 100Mbps or 1000Mbps) when connected to
other network devices (network card, hub, switch, etc).
2. Line loss is excessive during fiber connection: Excessive
loss in connector installation and fiber termination, or
excessive intermediate nodes may cause excessive loss
rate or abnormal operation.
10/100/1000Base-TX to 1000Base-FX
SSF-SFP-RJ45POE-1G
PoE+ (PSE) Media Converter
User Manual
Read Manual Before Use
www.cleerlinefiber.com
