6
P2268BA/EN 2015-10
P2268BA-EN_b.fm, 08.02.2016
Product description
2
Product description
The socket tray is used in conjunction with an Apex Tool Group fastener control with Arcnet port. Depending
on the software, the following can be parameterized:
•
a
Application
(App)
A App (fastening strategy, fastening parameter set) includes settings for
-
Fastening sequence
-
Shut off and boundary values
-
Torque
-
Speed specifications
•
a
Linking Group
(LG).
The LG (links) comprises several linking steps (LS).
The socket tray couples App/LG with a socket. The following use cases are possible (see chapters below):
•
Use case 1 – Controlling App/LG by socket removal, Seite 9.
•
Use case 2 – Controlling socket removal by App/LG, Seite 13
A defined bit pattern defines which socket has to be taken.
Depending on the version, the socket tray can have up to 4 or 8 sockets.
2.1
Sizes
3
Before initial operation
The socket tray must be connected before commissioning on Arcnet.
3.1
Necessary components
Number of possible sockets
Socket tray
App selection
4
S133410
1-4
8
S133411
1-8
System bus cable
Order no.
S133408-×××
System bus
terminator
Order no.
S133412
Hex wrench
Phillips
PH3
Hex wrench
Blade width 2
Potentiometer
calibration
Threaded pin
Order no.
S906934
for not connected
use
Offset screw-
driver 2.5
for not connected
use