Components
10
P2260JH | 2019-05
Apex Tool Group
3
EN
Accessories for Siemens SCALANCE W788-1 M12
Accessories for Phoenix FL WLAN 1100
3.4
Ethernet patch cable, CAT5 (Phoenix access point)
Maximum length = 100 m.
The cables comply with the UTP/STP Category 5 (EIA 568B, Cat 5) standards or better.
3.5
Ethernet switch
A standard ethernet switch can be used. Commissioning takes place according to the instruction manual
provided by the manufacturer. No installation settings have to be configured on the Ethernet switch. If an
ethernet switch with PoE (Power over Ethernet) is used, no additional power supply is necessary.
Product
Order No.
Description
Items delivered
Access point
961642PT
Without aerials
Without terminator
Aerial
961643PT
Terminator
961644PT
Network cable,
M12 connector
S981511
Length: 2 m
Cable,
Access point power supply
S133463-020
Length: 2 m
Optional
C plug (configuration plug)
961507PT
Removable disk on which the project planning
and configuration data are automatically saved.
Allows a defective assembly to be exchanged
more easily. Better "mean time to repair".
Product
Order No.
Description
Items delivered
Access point
962071PT
Network cable
Network: controller, access point, ethernet
switch
Cable,
Access point power supply
962073PT
Length: 2 m
Retaining angle
962074PT
Access point adapter
962075PT
M25/M32
Multiple seal insert for M25
962072PT
2 × 5 mm
Cable gland
S964918
M25 × 1.5
Both Cleco Production Tools access points have EU certification.
Ask the manufacturer about use in other regions.
Order no.
Lengt
h
Order no.
Lengt
h
S965412
2 m
S965416
26 m
S961365
4 m
S965417
34 m
S961568
5 m
543445-7
2.1 m
S965413
10 m
543445-25
7.6 m
S965414
14 m
543445-50
15.2 m
S965415
22 m
543445-100
30.4 m
