Apex Tool Group
P2260JH | 2019-05
17
Installation – Local network
6
EN
4. Start the
Basic Wizard
.
5. Select the individual menus with <Next>.
6. Select country in which the access point is
in use:
Country > Country code
.
7. Define the IP address:
Enter
IP > IP address / Subnet mask
.
It may be necessary to change the IP address
to guarantee communications between the
controller and the tool:
•
The IP addresses for the access point, con-
troller, tool ands service PC must be in the
same subnet.
•
Each IP address may only be assigned
once.
8. Define frequency band:
Select
Radio > Frequency band / WLAN
mode
.
