6
P2544PM | 2021-02
Apex Tool Group
1
EN
Warnings and notices
Warning notices are identified by a signal word and a pictogram:
•
The signal word describes the severity and the probability of the impending danger.
•
The pictogram describes the type of danger
Abbreviations
Definition
Danger
A symbol combined with the word
Danger
indicates a hazard with a
high level of risk
which, if not avoided,
will result in death or extremely serious injuries.
Warning
A symbol combined with the word
Warning
indicates a hazard with a
medium level of risk
which, if not
avoided, could result in death or serious injury.
Caution
A symbol combined with the word
Caution
indicates a hazard with a
low level of risk
which, if not avoided,
could result in minor or moderate injuries or environmental damage.
Note
A symbol combined with the word
Note
indicates a potentially
harmful situation
which, if not avoided,
could result in damage to the tool or the environment
.
General instructions
include application tips and useful information, but no warnings against hazards.
Abbreviation
Description
OK
Result is OK
TQ
Torque
NOK
Result is not in order
AN
Angle
Term
Description
FastApps mode
In the FastApps mode, the tool works independently without a controller.
The Linking groups (FastApps) and settings are parameterized on the tool.
mPro mode
In the mPro mode, a connection between the tool and the controller is nec-
essary. The linking group and settings are parameterized on the controller
and sent to the tool.
