Apex Tool Group
P2398PM |
2019-12
35
Menus and Functions
3
EN
To start the tests, keep the Start switch pressed.
>
>
Fig. 3-27: Submenu – Angle test
3.8.3
Torque test
With the torque test, the functionality of the measuring sensor can be checked and the torque measurement
can be evaluated. At the beginning of the test, the torque is 0 Nm. Throughout the entire test, the torque is
measured and displayed.
To start the tests, keep the Start switch pressed.
>
>
Fig. 3-28: Submenu – Torque test
Symbol
Description
Display of the shut-off angle of 360°.
Display of the angle.
The displayed angle should be close to 360°.
360
362
0.08 Nm
0.13 Nm
Summary of Contents for CellCore CCBA
Page 65: ......
