Cleco 20PHH, Instruction Manual

Page: 6 / 38

6 P1992BA/EN 2014-06
1994b_1_5_en-bedingt.fm, 12.06.2014
Safety
1
1.3 Operator training
Users must be given instruction in the correct usage of the tool. The operator must make the Operating
Manual accessible to users and make sure that the users have read and understood it. The tool may only
be connected, used, serviced and repaired by qualified persons. Repairs to the tool may only be performed
by authorized personnel.
1.4 Personal protective equipment
• Wear protective goggles to protect against sprays of metal splinters and fluids.
• Wear gloves to protect against skin irritation in case of direct contact with oil.
Danger of injury by being wound up in and caught by machinery
•
Wear a hairnet.
• Wear close-fitting clothing.
• Do not wear jewelry.
Sound level in the area of the user > 80 dB(A), danger of hearing damage
•
Wear hearing protection.
1.5 Designated use
The 20PHH is designed exclusively for fastening and releasing threaded fasteners.
•
Do not use it as a hammer.
• Do not open it or modify it structurally.
• Do not use it in areas where there is a risk of explosion.
1.6 Noise and vibrations
With vibration levels ahv > 2.5 m², the exposure time is to be reduced. See example
Sound pressure level Lp in accordance with DIN EN ISO 15744
Idle for n

7500 rpm < 76 dB(A)
Vibration values in accordance with DIN EN ISO 28927-2
20PHH:
Idle ahv for n

7500 rpm < 1.8 m/s²
Pulses ahv < 2.0 m/s²
20PHHA:
Idle ahv for n

7500 rpm < 1.8 m/s²
Pulses ahv < 2.5 m/s²
V
ibration level ahv m/s²
Allowed daily exposure time (hrs.)
Example
Not allowed
Allowed