M). CLEANING AND/OR REPLACING ELECTRODE
The only part of the
MineralPURE
Ionizer that will need maintenance or
replacement is the electrodes. They should last about 1-5 years depending on
your pool size, length of swimming season, water temperature and how well the
water was balanced (ion level, pH, etc.). If the LED light "
Check Electrode
"
comes on, it may be time to clean or replace the electrode. To inspect the
electrodes, simply unscrew the electrode chamber with your hands and visually
inspect the electrode bars. A blue greenish coating is normal, however, if there is
a heavy buildup, you may need to clean the electrode. Using an old toothbrush
and lemon juice or a muriatic acid/water solution, scrub the buildup off the
electrode. If the electrodes are thin and worn out, they will need to be replaced.
Electrode Reordering Information:
Replacement Electrode - Part # CLE-02 - residential copper electrode for the R-50 Model.
Always add more teflon tape when screwing the electrode back into the flow-cell tee.
N). ION-TEST KIT REPLACEMENT
You should replace the reagents at least once a year. You can either replace the entire test kit (exactly as supplied in the
box when you received the
MineralPURE
unit) or replace the reagents.
Order # CLA-41 MineralPURE complete test kit
Order # CLA-42 Replacement reagents "A" and "B"
Contact your dealer or Clearwater Enviro Technologies, Inc. for more ordering
information or visit www.ElectrodeWarehouse.com
11
The Healthy Alternative to Chlorine
CLA-41
CLA-42
