Page 2
Step 1: Parts and Overview
Congratulations on your purchase of the ultimate car audio upgrade
available for the Mazda Miata/MX-5!
Below are some of the features associated with this speaker component set:
• This system was specifically designed for the Miata/MX5.
• Hundreds of hours have gone into the testing and design of this audio system.
• Measurements were made with the industry’s top equipment.
• No other speakers in the world have been so meticulously designed
specifically for one vehicle.
• The system was designed so that anyone can install it with minimal tools.
• There is no need to do any drilling, cutting, tearing or splicing with this
install. This will keep your factory warranty intact.
• As with all Clearwater purchases your satisfaction is guaranteed!!
Important Note:
Some Miatas came with incorrectly wired headrest speakers from the factory.
The only easy way to know is replace the entire headrest harness with the
Clearwater full harness.
Please be sure to read our instructions thoroughly before
attempting installation.
Parts Included:
1. Clearwater Two-Way
Loudspeakers (4)
2. Clearwater Headrest Harness
“full” for all years (1)
3. Clearwater Headrest Harness “short”
(1994-97½ 2 Harnesses) (2)
Tools Needed:
1. Phillips Head
Screwdriver (#2)
2. Wire coat hanger
3. Roll of adhesive tape
We are passionate about our audio and you should be too!
