1
1
Hardware Installation and Connection
Note: All the installation and operations here should conform to your local electric
safety rules.
1.1
Check Unpacked NVR
When you receive the NVR from the forwarding agent, please check whether there is any visible damage.
The protective materials used for the package of the NVR can protect most accidental clashes during
transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list (Remote control is optional). Finally you can remove the
protective film of the NVR.
1.2
About Front Panel and Rear Panel
For detailed information of the function keys in the front panel and the ports in the rear panel, please refer
to the
User’s Manual
included in the resource CD.
The model number in the stick on the bottom of NVR is very important; please check according to your
purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial number when
we provide the service after sales.
1.3
After Remove the Chassis
Please check the data cable, power cable, COM cable and main boar cable connection is secure or not.
1.4
HDD Installation
Important
：
Please turn off the power before you replace the HDD.
The pictures listed below for reference only
You can refer to the
User’s Manual
for recommended HDD brand. Please use HDD of 7200rpm or higher.
Usually we do not recommend the PC HDD.
1.4.1 WiFI-NVR-4 Series
○
1
E
A
. Loosen the screws of the upper
cover and side panel.
A
○
2
E
A
Fix four screws in the HDD
(Turn just three rounds).
A
○
3
E
A
Place the HDD in
accordance with the four holes
in the bottom.
