ClearView Panther-16HP, Quick Start Manual

Page: 9 / 270

4
Network
abnormal
indication light Net Network error occurs or there is no network connection, the light
becomes red to alert you.
HDD abnormal
indication light
HDD HDD error occurs or HDD capacity is below specified threshold
value, the light becomes red to alert you.
Record light 1-16 System is recording or not. It becomes on when system is
recording.
IR Receiver IR It is to receive the signal from the remote control.
Alarm indication
light Alarm Here you can view there is external alarm input or not. The light
becomes on when there is an external alarm. The light become
off when the external alarm stops.
1.6 Rear Panel
This series DVR rear panel is shown as below. See Figure 1-2.
Figure 1-2
Please refer to the following sheet for detailed information.
SN Icon Name Note
1 Power switch Power on/off button.
2
1
～
16
Alarm input
port 1
～
16

There are two types; NO (normal open)/NC
(normal close).

When your alarm input device is using external
power, please make sure the device and the
DVR have the same ground.
NO1
～
NO3
Alarm output
port 1
～
3

3 groups of alarm output ports. (Group 1
：
port
NO1
～
C1,Group 2:port NO2
～
C2,Group 3:port
NO3
～
C3
）
).Output alarm signal to the alarm
device. Please make sure there is power to the
external alarm device.

NO
：
Normal open alarm output port.

C
：
Alarm output public end.
C1
～
C3
3 VGA VGA video
output
VGA video output port. Output analog video signal.
Can connect to the monitor to view ananlog video