ClearView Panther-16HP Quick Start Manual Download Page 71

Page: 71 / 270

wizard is complete. See Figure 4-6.

Figure 4-6

4.3

Manual Record

4.3.1 Live Viewing

After you logged in, the system is in live viewing mode. You can see system date, time,

channel name and window No. If you want to change system date and time, you can

refer to general settings (Main Menu->Setting->System->General). If you want to

modify the channel name, please refer to the display

settings (Main

Menu->Camera->CAM name)

Tips



Preview drag: If you want to change position of channel 1 and channel 2 when you

are previewing, you can left click mouse in the channel 1 and then drag to channel

2, release mouse you can switch channel 1 and channel 2 positions.



Use mouse middle button to control window split: You can use mouse middle

button to switch window split amount.

Please note you can not switch position of one analog channel and one digital

channel.

Preview Control

The preview control function has the following features.



Support preview playback.



In the preview desktop, system can playback previous 5-60 minutes record of

current channel. Please go to the Main Menu->General to set real-time

playback time.



Support drag and play function. You can use your mouse to select any

playback start time.



Support playback, pause and exit function.

Recording status

Video loss

Motion detection

Camera lock

Summary of Contents for Panther-16HP















































































































































































































































































Search results

Summary of Contents for Panther-16HP

Reviews:

ClearView Panther-16HP, Quick Start Manual, Page: 71 / 270

Search results

Summary of Contents for Panther-16HP

Reviews: