KR356H DVB-S2 HD IRD User Manual
37 / 43
KR356H supports decode program to output at HDMI/SDI/CVBS/YPbPr. Users can
configure the Video/Audio output parameters in this tag. (Figure-14)
Figure-14
NOTE:
⚫
KR356H supports maximum 2 channels of analog stereo audios output
simultaneously.
⚫
When the program users choose to decode and output has only one audio channel,
users need to configure Primary Audio Chanel (‘Audio 1 Mode’ and ‘Audio 1
Select’) only.
⚫
5.1 channel audio can only be resume via HDMI and SDI interfaces. When users
choose HDMI ro SDI as the output interface and output 5.1 channel audio, users
need to select ‘5.1 Channels’ under ‘Audio 1 Mode’ and set ‘Audio 2 Select’ off.
After finishing the configuration, click
to confirm.
Parameters
→
IP Stream:
This unit supports TS output in IP (1 MPTS & 8 SPTS). Click “IP Stream” and it displays
the interface where users can configure the MPTS & SPTS out parameters. (Figure-15)
It displays all the input
programs. Select one
program
here
to
decode and output.
To set the video and audio
parameters
for
the
program to be decoded
Primary Audio
Secondary Audio
