HD4660 Manual Rev 1.0
3.2.6 Step 5: IP Configuration Tab
Use the IP Setup Tab to configure the device’s IP address, Mask, Gateway,
3.2.7 Step 6: Save IP Configuration
Perform apply once all parameters are set.
3.2.8 Step 7: Administration
Selecting “Reboot” will automatically reset all saved settings back to factory default
settings. All saved settings will be lost.
Use the Admin Setup Tab to set the device’s reboot, configuration, software update,
password change,
ADMINISTRATION PAGE
FUNCTIONS
ACTIONS
Reboot
Reboot device. All unsaved settings will be lost.
Configuration
User can upload the file with pre-saved configuration settings
to device.
Software update
Upload a saved firmware file
Password Change
Create and save new password for GUI
To upload a configuration file- simply click
“Choose File”
then locate the file you want to
upload. Click “
Upload
” to install the configuration files. This function is helpful to the
installer when installing a large number of encoders in a single system.
9
