ClearView Hawk Series User Manual Download

Page: 96 / 147

3) Multiple-channel monitor, system adopts extra stream to monitor by default. Double click one

channel, system switches to single channel and system uses main stream to monitor. You can

view there are two icon at the left top corner of the channel number for you reference. M stands

for main stream. A stands for

4) When you switch from Monitor to Search or Configuration, system pops a dialogue box asking

you leave current interface or not. See Figure 7-21.Click the OK button, system will close current

monitor window. For example, you click the Config button when you are monitoring, system pos

up a following dialogue. Click the OK button, system closes current monitor interface and open

the configuration interface. The monitor interface appears automatically after you close

configuration interface. When you switch from Search to the Configuration interface, system also

pops up the same dialogue box for your confirmation. Click OK button, you can see system close

playback interface and open the configuration interface. Please note, system will not open the

playback interface again after you close the configuration interface.

Figure 7-21

5) If you login via the WAN mode, system does not support alarm activation to open the video

function in the Alarm setup interface.

Important

•

For multiple-channel monitor mode, system adopts extra stream to monitor by default. You

can not modify manually. All channels are trying to synchronize. Please note the

synchronization effect still depends on your network environments.

•

For bandwidth consideration, system can not support monitor and playback at the same time.

System auto closes monitor or playback interface when you are searching setup in the

configuration interface. It is to enhance search speed.

7.5 Configure

7.5.1 System Information

7.5.1.1 Version Information

Here you can view device hardware feature and software version information. See Figure 7-22.

Summary of Contents for Hawk Series




















































































































































Search results

Summary of Contents for Hawk Series

Reviews:

Related manuals for Hawk Series

Brands by name

Popular brands

ClearView Hawk Series, User Manual

Search results

Summary of Contents for Hawk Series

Reviews:

Related manuals for Hawk Series

Brands by name

Popular brands