ClearView Hawk Series User Manual Download

Page: 53 / 147

5.3.2 Encode

Encode setting includes the following items. See Figure 5-6.

Please note some series do not support extra stream.

•

Channel: Select the channel you want.

•

Compression: System supports H.264.

•

Resolution: System supports various resolutions, you can select from the dropdown list. For

this model, main stream supports D1/HD1/2CIF/CIF/QCIF.

�

For the 4-chahnel mode, the main stream supports D1/HD1/2CIF/CIF/QCIF and

the extra stream supports CIF/QCIF.

�

For the 8/16-channel, the main stream supports D1/HD1/2CIF/CIF/QCIF and the

extra stream supports QCIF.

•

Frame rate: It ranges from 1f/s to 25f/s in PAL mode and 1f/s to 30f/s in NTSC mode.

�

For the 4-channel series product: All-channel supports D1/HD1/2CIF/CIF/QCIF

and the frame rate ranges from 1f/s to 25f/s in PAL mode and 1f/s to 30f/s in NTSC mode.

�

For the 8-channel series product: The resolution of 1-channel and the 2-channel

support D1/HD1/2CIF/CIF/QCIF (frame rate: 25/30fps), the resolution of rest channels (3-

channel to 8-channel) support D1/HD1 (frame rate

≤

12/13fps), 2CIF/CIF/QCIF(frame rate:

25/30fps).

�

For the 16-channel series product: All-channel support CIF/QCIF and the frame

rate ranges from 1f/s to 25f/s in PAL mode and 1f/s to 30f/s in NTSC mode. All-channel

support D1/HD1/2CIF and the frame rate ranges from 1f/s to 6f/s in PAL mode and 1f/s to

7f/s in NTSC mode.

•

Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set video

quality.

•

Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image

quality.

•

Video/audio: You can enable or disable the video/audio.

•

Overlay: Click overlay button, you can see an interface is shown in Figure 5-7.

•

Cover area (Privacy mask): Here is for you to set privacy mask section. You can drag you

mouse to set proper section size. In one channel video, system max supports 4 zones.

�

Preview/monitor: privacy mask has two types. Preview and Monitor. Preview

means the privacy mask zone can not be viewed by user when system is in preview status.

Monitor means the privacy mask zone can not be view by the user when system is in monitor

status.

�

Time display: You can select system displays time or not when you playback.

Please click set button and then drag the title to the corresponding position in the screen.

�

Channel display: You can select system displays channel number or not when you

playback. Please click set button and then drag the title to the corresponding position in the

screen.

Please highlight icon

to select the corresponding function.

Summary of Contents for Hawk Series




















































































































































Search results

Summary of Contents for Hawk Series

Reviews:

Related manuals for Hawk Series

Brands by name

Popular brands

ClearView Hawk Series, User Manual

Search results

Summary of Contents for Hawk Series

Reviews:

Related manuals for Hawk Series

Brands by name

Popular brands