8
Revision date: 09.30.10
END FRAME INSTALLATION (CONTINUED)
6. Attach each end of the two (2)
upper
horizontal braces
to the end rafter using the 108506 mounting brackets and
Tek screws as shown below. Position bracket so that a Tek screws can be attached through both lips of the hat
channel and into the bracket (6b and 6c).
7. Attach each end of the
lower braces directly
to the ground posts or rafter legs using Tek screws as shown below.
Align edge with the outer edge of the rafter leg or ground post.
8. Read the care and maintenance section that follows.
End Frame Assembly
6a
Hat
channel is
not shown.
6b
OUTSIDE VIEW
6c
INSIDE VIEW
GROUND LEVEL
7a
7b
ATTENTION:
Use two sections of hat
channel to create the two upper end
wall braces. Cut to length and overlap
as needed.
