Introduction
Thank you for purchasing this ClearSpan™ structure. When properly assembled, the ClearSpan™
structure will provide years of reliable service. This instruction manual includes helpful hints and
important information needed to safely assemble the structure. Please read this instruction manual
before
you begin. If you need assistance during construction, call us at 1-888-603-4445.
Safety Precautions
•
Wear eye protection.
•
Wear head protection.
•
Wear gloves when handling metal tubes and cables.
•
Use a portable GFCI when working with power tools and cords.
•
Do not climb on the shelter or framing during or after construction.
•
Do not occupy the shelter during high winds, tornadoes, or hurricanes.
•
Provide adequate ventilation if the structure is enclosed.
•
Do not store hazardous materials in the shelter without proper ventilation.
•
Provide proper ingress and egress to prevent entrapment.
Required Tools
The following list identifies the tools needed to assemble the building. Additional tools and supports
may be needed depending on the structure, location, and application.
•
Tape measure or measuring device
•
Marker to mark locations
•
Electric drill and driver (Battery-powered drivers work best.)
•
Metal-cutting saw or tool to cut cable to the required length
•
Wrench set to tighten bolts
•
Utility knife or scissors
•
Ladders, work platform, and other machinery designed to work safely at the height of the
building
•
Rope or cable
•
Adjustable pliers
•
Lifts to set and hold rafters in place
Anchoring Instructions
Prior to assembling the structure, you must read the anchoring precautions and instructions included
with the kit. Anchoring instructions are included in the MUST READ document. You must anchor the
building after the frame is assembled and before the cover is installed.
Visit www.ClearSpan.com for additional products and customer assistance.
1 of 26
