17
CLEARSPAN
™
ECONOMY MOO-TEL
™
Revision date: 01.26.18
8. Slide the Twist-of-the-Wrist mounting plate over the
long bolts and secure the plate with two lock nuts
9. Attach the Twist-of-the-Wrist gearbox to the mounting
plate using hex head bolts.
10. Using a carriage bolt, attach the square shaft to a
tubing adapter.
11. Slide the square shaft through the Twist-of-the-Wrist
gearbox.
TWIST-OF-THE-WRIST ASSEMBLY (Continued)
Lock Nuts
12. Slide the Twist-of-the-Wrist assembly onto the
aluminum channel from the ground end. (This is the
free end of the channel.)
13. Roll the cover conduit up to the Twist-of-the-Wrist
assembly.
14. Attach the rolled conduit to the square shaft of the
assembly by inserting a carriage bolt through the hole
in the conduit and tubing adapter. Tighten the nut.
15. Attach the crank handle to the Twist-of-the-Wrist
assembly. (Cover is not shown in the above diagram.)
16. Test the operation of the Twist-of-the-Wrist assembly.
NOTE:
If the cover rolls in the desired direction, but
you want to turn the crank in the opposite direction for
the same result, unbolt, reposition the gearbox, and
remount it
on the same side of the mounting bracket.
