CLEARSPAN
™
FABRIC STRUCTURES
4
Revision date: 09.08.09
REQUIRED TOOLS
The following list identifies the main tools needed to assemble the shelter.
Additional tools and supports may be needed depending on the structure,
location, and application.
Tape measure or measuring device and marker
•
Variable speed drill and impact driver (cordless with extra batteries works
•
best)
Wrenches or ratchet and socket set (recommended)
•
Scissors or utility knife to cut cover material and strap
•
Tool to cut cable to the required length
•
Hammers, gloves, and eye protection
•
Ladders, work platforms, and other machinery for lifting designed to work
•
safely at the height of the shelter
Rope (or straps) for cover installation
•
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the necessary parts
before
you
begin to assemble the shelter.
Unpack the contents of the shipment and place where you can easily
1.
inventory the parts. Refer to the Bill of Materials/Spec Sheets.
Verify that all parts listed on the Bill of Materials/Spec Sheets are present.
2.
If anything is missing or you have questions, consult the shelter diagrams
throughout these instructions for clarification, or contact Customer Service.
NOTE:
At this time, you do not need to open the plastic bags containing the
fasteners (if used).
SHELTER CARE AND MAINTENANCE
Proper care and maintenance of your shelter is important. Check the following
items periodically to properly maintain your shelter:
Inspect the shelter and all components frequently and regularly.
•
Regularly check the main cover and panels (if equipped) to see that these
•
remain tight and in proper repair.
Check the cable turnbuckles and cable clamps to see that these remain
•
tight. Tighten as needed. Check the cable to verify that it is not worn,
wearing on a frame member, or touching the main cover or end panels (if
equipped).
Check connections and all fasteners to verify that they remain tight.
•
Do not climb or stand on the shelter at anytime.
•
Remove debris and objects that may accumulate on the shelter. Use tools
•
that will not damage the cover when removing debris.
Remove snow to prevent excess accumulation. Use tools that will not
•
damage the cover when removing snow.
Check the contents of the shelter to verify that nothing is touching the cover
•
or the side panels that could cause damage.
Check the anchoring system to ensure that all components are tight and in
•
good repair.
Replace all worn or damaged parts promptly.
•
If the shelter is moved, inspect all parts and connections before
•
reassembling.
NOTE:
With the exception of Truss Arch buildings, ClearSpan™ shelters and
greenhouses
do not
have any tested loading criteria.
