CLEARSPAN™ CANOPIES
12
Revision date: 07.21.08
ATTACH EYEBOLT ASSEMBLIES (CONTINUED)
With all supports attached to the side roof cover, install
5.
the remaining anchor kits to secure the shelter in
position.
ATTENTION:
Each anchor kit (#103599) contains four
(4) individual anchors. Depending on your shelter, you
may have extra anchors that can be installed in areas
not identified in the diagram.
With the shelter properly anchored, return to each
6.
anchor strap and retighten to secure the shelter.
ATTENTION:
DO NOT OVER TIGHTEN THE
STRAPS. STRAPS WILL BE TAUT WHEN PROPERLY
TIGHTENED
.
With the shelter properly anchored, read the Shelter
7.
Care and Maintenance information that follows.
CARE AND MAINTENANCE
Proper care and maintenance of the shelter will help to
ensure years of service. The following items identify areas
that should be periodically checked to ensure that your
shelter is maintained properly:
Regularly check the roof covers to see that they remain
•
tight and in proper repair.
Check connections and all fasteners to verify that they
•
remain tight.
Do not climb or stand on the shelter at anytime.
•
Remove debris and objects that can accumulate on the
•
shelter. Use tools that will not damage the cover when
removing debris.
Remove snow to prevent excess accumulation. Use
•
tools that will not damage the cover when removing
snow.
Check the contents of the shelter to verify that nothing
•
is touching the cover that could cause damage.
Check the anchoring system to ensure that all
•
components are tight and in good repair.
If the shelter is moved, inspect all parts and
•
connections before reassembling.
Never pack the covers when they are wet. Always dry
•
them before you pack the shelter.
For replacement or missing parts, call 1-800-245-9881
•
for assistance.
NOTE:
With the exception of Truss Arch buildings,
ClearSpan™ shelters and greenhouses
do not
have any
tested loading criteria.
