CLEARSPAN
™
JUBILEE TENTS
10
Revision date: 07.01.08
TOP VIEW
LOWER BASE ASSEMBLY
8" - 9"
8" - 9"
FRAME ASSEMBLY (CONTINUED)
Using the diagram below, lift each leg pipe and slip the
6.
appropriate short cross or 3-way open corner onto the
leg pipe.
Slide each fitting up the leg and position it 8" to 9" from
7.
the corner or side coupler (
center-to-center
) as shown
in the pictures below. Secure with 5/16" hex key. Set
screws are loosened and retightened when pipes are
added.
Lower Base Rafter
Lower Base Rafter
Lower Base Rafter
Lower Base Rafter
Lower Base Rafter
Lower Base Rafter
Lower Base Rafter
Lower Base Rafter
Short Cross
Short Cross
Short Cross
Short Cross
3-W
ay Open Corner
3-W
ay Open Corner
3-W
ay Open Corner
3-W
ay Open Corner
NOTES:
Spread the leg pipes apart to fit the lower base rafters
into the fittings.
If needed, remove corner leg to fit the final rafter into
the final fitting, and replace corner leg.
Continue by squaring and anchoring the frame.
9.
Beginning at a corner, slide each lower base rafter
8.
into place as they are positioned in the diagram and
work around the frame and back to the starting corner.
Secure each rafter by tightening the fittings with a 5/16"
hex key. Assistance is required to assemble the lower
base assembly.
