ii
same model series. External power connections must be
properly insulated.
•
Do not connect directly to mains power for any reason.
•
Do not install near any heat sources such as radiators,
heat registers, stoves, or other sources of heat.
•
Do not subject the cables to excessive stress, heavy loads
or pinching.
•
Do not open or disassemble the device. There are no user
serviceable parts.
•
Refer all servicing to qualified personnel.
Servicing may be required when the device has been
damaged (such as from a liquid spill or fallen objects), has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
•
Do not use strong or abrasive detergents when cleaning
the device body.
•
Use only accessories recommended by ClearPix.
•
Use only UL-listed mounting bracket suitable for the
mounting surface and minimum 0.7 kg (1.5 lb) weight.
•
Use of controls or adjustments or performance of
procedures other than those specified in this document
may result in hazardous radiation exposure.
Caution —
Failure to observe the following instructions
may result in injury or damage to the camera.
