ClearOne VIEW Pro D210, Quick Start Manual

Page: 11 / 20

VIEW PRO D210 QUICK-START GUIDE
9
CONFIGURING THE DECODER
The VIEW Pro D210 Decoder is configured for use in the commercial
or residential network using the StreamNet Dealer Setup program.
StreamNet Dealer Setup is a PC-based program that allows you to
configure devices so that they can communicate across a StreamNet
network. Phases of the software setup include:
• Create a new or open an existing project
• Add the D210 device to the project
• Match the correct device from the right-hand column.
• Configuring the device with system-specific information regarding
Display Outputs, Controls, IP.
• Saving the project
• Sending the configurations
These steps in these processes are detailed in the DigiLinX Dealer Setup
manual available for viewing or download at www.ClearOne.com.
NOTE: Dealer Setup version 3.00.48 or later is required to support
the D210 decoder.
Information specific to the VIEW Pro Decoder is contained in the VIEW
Pro - D110 Digital AV Decoder Installation and Users Manual available
for viewing or download at www.clearone.com. (The steps for using the
Dealer Setup program and options for the D210 are similar to those for
the D110 decoder.)