UNITE 100 U
sEr
M
aNUal
3
Installation
When setting up the camera, never move the camera by seizing the camera head. Don’t rotate
camera head by hand; otherwise, mechanical trouble will occur.
Observe all warnings listed at the beginning of this manual
For stability, the base can be fixed in place by the double-sided adhesive strips.
To prevent damage to the camera, never turn the camera power on before installation is completed.
CONNECTIONS
The connections to the camera are as illustrated below:
s
ETUp
Perform the following:
1. Make the power connection, but don’t plug in the supply to turn the camera power on.
»
Note: You will connect the USB or DVI cable depending on which is sent with your
equipment.