BEAMFORMING MICROPHONE ARRAY SYSTEMS
4 Beamforming Microphone Array Systems
P-L
ink
and
E-B
us
C
onnECtions
NOTE:
Firmware upgrades are performed via the E-bus or P-Link
connection. Plugging the PoE cable into the E-bus or P-Link
connections may cause damage to your BFM unit.
Power Over Ethernet (PoE) Power Supply
(Front and Back Views)
Power Cord
to AC Power
PoE Ethernet Cable to
Beamforming Microphone Array
P
o
E C
onnECtions
Use the appropriate AC cord to connect the PoE power supply to the
AC power. Then plug the PoE cable into the LAN+DC connection on
the power supply. Route the PoE cable where it can be fed through the
mount assembly or to the conference table with the BFM1 or BFM2 unit.
NOTE:
The PoE connection is only for power, not control. There
is no daisy-chain power for the BFM1, power must be supplied to
individual units. For the BFM2, power only needs to be supplied
to individual units if not using a ClearOne or same specification
standard PoE Injector.