BEAMFORMING MICROPHONE ARRAY SYSTEMS
12 Beamforming Microphone Array Systems
Connect the LINK IN, LINK OUT (if needed) and PoE cables and secure
the cables under the Cable Retention Clips.
Use slotted keholes in Mic Mounting Plate
to hang Beamforming Microphone Array
on Ceiling/Wall Mounting Plate
LINK IN and LINK OUT
Connectors
PoE Connector
Pass LINK IN, LINK OUT and PoE
cables through plates and
under Cable Retention Clips
For mountings with the cables coming through the wall, hold the
Beamforming Microphone Array with the Mic Mounting Plate attached,
route the E-bus and PoE cables under the Mic Mounting Plate to the
ends where they will be connected. Connect the LINK IN, LINK OUT
(if needed) and PoE cables and secure the cables under the Cable
Retention Clips.