QUICK-START GUIDE
3
QUICK-START OVERVIEW
Installing and using the BFM2 in your CP2 site is subject to the following
parameters:
1. The BFM2 can only be used with CP2 systems.
2. You must have a CP2 128, 128D, 128T, 128TD, 128V, 128VD, 120,
48T and/or 48V mixer in the site. The BFM2 will not work with
standalone 012, 128SR, or 128SRD units.
3. Connect up to 3 BFM2s (current) per CP2 unit, and up to 6 BFM2s
per Regular P-Link chain with 2 CP2 unit stack. More CONVERGE
Pro units may be added to increase the number of BFM2s per site.
Quick Start Procedures
These steps must be done in the following order to use the BFM2 in your
CONVERGE Pro 2 Site:
1. Update the CONVERGE Pro 2 firmware to the latest version using
CONVERGE Pro 2 CONSOLE software.
2. Connect the BFM2 to the updated CONVERGE Pro 2 via the P-Link
bus.
3. Update the BFM2 firmware using CONVERGE Pro 2 CONSOLE.
(The BFM2 firmware can not be upgraded directly without an
updated CONVERGE Pro 2.)
4. Test the BFM2.
5. Mount the BFM2.
