5
FieldSmart 96-Port PON FDH Cabinet
__________________________________________________________
Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
Manual 022684 Rev A - Jan 2022
Note:
Clearfield does not recommend using lag bolts to mount cabinet to pole. Clearfield recommends using hardware with
a minimum of 5/8” diameter. Care should be taken to avoid over-tightening and deforming the hoist plate. Lock tight (red)
should be used on nuts to prevent loosening of nuts. Make sure the thread rod/nut does not exceed the top bend in bracket
or it will interfere with cabinet.
5.
Lower the cabinet onto the pole mounted toothed bracket until the
hoist plate is over the flange of the toothed bracket.
6.
Level cabinet and drill 5/8” hole through lower bracket and pole,
and install 5/8” rod, washers, and nuts to secure the cabinet.
Note:
Care should be taken to avoid over-tightening and deforming the
hoist plate.