Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
6
FieldShield D-ROP
Installation Manual
_________________________________________________________
Manual 018958 REV C - Oct 2017
Figure 1
Figure 2
Step 1
:
Bury Duct
Bury cable according to best practices
for chosen drop method
(Figure 1)
.
NOTE:
Do not remove protective cov-
ering until duct has been buried.
Step 3
:
Ream Port
Use appropriate tool
(we recommend deburring tool)
to ream and chamfer edges of port
(Figure 3)
.
Step 2
:
Remove Flex Port Tab
Use a pair of pliers to snap off tab of
selected Flex Port
(Figure 2).
Figure 2
Installing into YOURx-Terminal
Figure 3
Figure 1
Step 1
:
Feed Through Flex Port
Guide preconnectorized fiber
(unassembled) into YOURx-Terminal
through Flex Port
(Figure 1)
.
Step 2
:
Seat FlexConnector
Once fiber is through,
seat FlexConnector into FlexPort
(Figure 2)
Preparing Terminal
Seating X-Connector