ClearCube Technology
8834 Capital of Texas Hwy N Austin, Texas 78759
voice 512 652 3500 www.clearcube.com
G0200104 Rev B
3.
Ensure that you have connected the power cable and AC
adaptor provided with your C7420. Connect the AC
adapter to the C7420, and then connect the power cable to
a power outlet. Briefly press and hold the power button to
power on the C7420.
C7420 Digital Fiber C/Port Indicators
Front Panel
•
Blue power indicator—Illuminated when the C7420 is
powered on.
•
Link LED—Shows when a connection, or link, is
established between the C7420 and a blade.
–
Green LED—C/Port and blade are connected.
–
Red LED—C/Port and blade are not connected (for
example, the C7420 LC fiber optic cable is
disconnected).
Rear Panel
•
ACT/LOS—This LED indicates fiber activity and a loss
of connection.
–
Blinking green—Signal activity
–
Orange—Loss of fiber signal
•
SPD—This LED indicates connection speed. When
illuminated, a 100–megabit connection is established.
Additional Steps
C7420 Digital Fiber C/Ports and dual–monitor blades
contain PCoIP processors that enable dual monitor displays.
You must provision the PCoIP processors on your C7420s
and on your blades when deploying them. See
User Port
Guide
at
support.clearcube.com
for information about
provisioning PCoIP processors on your C7420.
Email:
Web site:
support.clearcube.com
Toll-free:
(866) 652-3400
Phone:
(512) 652-3400
RoHS
WEEE Disposal Guidelines
In the European Union, this electronic
product falls under the European Directive
(2002/96/EC) WEEE. When it reaches the
end of its useful life or is no longer wanted,
do not discard with conventional waste, but
disposed of at an approved designated
recycling or treatment facility.
Check with your local authorities for proper
disposal instructions.
For assistance, contact ClearCube at
