Clearblue Fertility Monitor, Instruction Booklet

Page: 14 / 48

OK
05 06 07 08 09 10 11
Testing window is:
05:00 - 11:00
Press arrows to change the Testing Window.
From To
12
ow.
Please Note: Your Testing
Window must be convenient
for you to test the first urine
of the day (both weekdays
and weekends).
Determine the Test Window That’s Best For You
1. You can start using the Clearblue® Fertility Monitor on the first day of
your next cycle, but not before. The first thing to do is set the new cycle.
2. When you set a new cycle you:
• Tell your Monitor that your period has started and a new cycle has
begun.
• Establish the 6 hours each day during which you can do a test.
This is called the ‘Testing Window’. Your Testing Window should
be set so that it is convenient for you to test the
first
urine of the
day. This is important as this will contain the highest concentration
of hormones.
3. In the first cycle, the Monitor will automatically set your Testing
Window from 05:00 to 11:00. You can change this by using the
arrows to adjust the Testing Window and press ‘OK’.
At the start of each new cycle you will need to set a new cycle.
4. At the start of each subsequent cycle the Monitor will set the Testing
Window to the same time as your previous cycle.
Press > to check when your Testing Window is set.
5. You may change your Testing Window between day 1 and day 4.
To change your Testing Window follow the instructions to change
your cycle set up. See page 11.
6. You may wish to set up an alarm to remind you when to test.
You can do this once you have set up a new cycle. If you delete or
change your cycle during the first cycle of use, the alarm will be
deleted and you will need to reset it. The alarm will only be active on
test days, and can only be set during your Testing Window.
6. Press > > ON. Enter time and press OK. will be displayed in
the information bar to confirm an alarm is set.