manualshive.com logo in svg

Clearblue Easy, Instruction Booklet

Share
Download
Clearblue Easy Instruction Booklet Download Page 22

20

Your Monitor is Not Working.

These symbols will appear in the
unlikely event of a Monitor failure.
They tell you that a problem has been
detected and your Monitor needs
replacing.

5.

or

6.

The Test Stick Slot Requires
Cleaning.

This symbol indicates that the Test
Stick Slot is dirty. The Test Stick Slot
should be gently cleaned with a
slightly damp cotton swab (never use
anything other than water). Never
attempt to clean the Test Stick Slot if
the Brush Symbol is not showing. Too
much cleaning may affect the
Monitor’s ability to read the Test Sticks.

7.

Test Stick Slot is Not Ready.

These symbols indicate that the Test
Stick Slot is not ready. Remove the Test
Stick from the Test Stick Slot and turn
your Monitor off. Turn the Monitor on
again and if the                         symbol
appears, put the Test Stick in correctly
until it clicks into place. If there is no
Test Stick in the Test Stick Slot, you
need to clean the Test Stick Slot (see 6.
for cleaning instructions).

Symbols And Errors: Practical Advice

b09401_CB_FAM_Booklet.qxd  8/20/08  11:18 AM  Page 22

Summary of Contents for Easy






































Reviews:

No comments

Brands by name

Popular brands

Load more brands