![Clearblue Easy Instruction Booklet Download Page 11](http://html.mh-extra.com/html/clearblue/easy/easy_instruction-booklet_2620992011.webp)
9
Turning the Clearblue Monitor On and Off
• Once you have inserted the batteries, you can turn the Monitor on and off by pressing
the white On/Off Button on the top left hand corner of the Monitor. When you turn
the Monitor on you will see a red light flash in the Test Stick Slot and the Display
Screen will briefly show the full range of symbols. This is normal and confirms that the
Monitor is working correctly. After a moment the Display Screen will clear and you will
see ‘--‘ and a flashing ‘
m
’ on the Display Screen. If you see the red light flash, but
nothing is on the Display Screen, check that the batteries are installed correctly. The
Monitor is now ready for you to set the
m
Button on the first day of your period.
Pressing the On/Off Button again will turn the Monitor off. You may turn the Monitor
off at any time apart from when it is reading a Test Stick. The Monitor will turn off after
30 seconds if a Test Stick is not being read. Simply press the On/Off Button to turn your
Monitor back on.
Please Note:
The time you press the
m
Button is very important. You should read the
instructions on pages 11 and 12 carefully BEFORE doing this.
Push the On/Off Button
b09401_CB_FAM_Booklet.qxd 8/20/08 11:18 AM Page 11