Performance
Instruction manual
Page 15
©
clearaudio electronic GmbH 2007
ca. 8 mm
Turning the counter weight forward or backward (
green arrow = more tracking
force
/
backward = less tracking force
) you can now set the exact weight of the pick-up
/cartridge.
Now mount the pulley on the motor-unit. Slide the pulley onto the axle. Make sure the
distance between the bottom of the pulley and the motor-chassis is about 3 mm. Tighten the
pre-mounted screws with the enclosed screwdriver.
Place the motor into the cut out on
the left of chassis. Put the belt
around the platter and the pulley. The pulley is
equipped with 6 little grooves fort the belt. Those with
a smaller diameter are used for the speed 33 1/3 U/m,
those with the bigger diameter are used
for the speed 45 U/m.
3 x
