User manual / Bedienungsanleitung
Page / Seite 6
© clearaudio electronic GmbH, 2022-10
2. Set-up adjustments
To ensure the best possible channel separation, the left and right channels are entirely separate in
the
balance V2
. All switches are therefore duplicated for the left and right channels.
Please make sure that both corresponding switches are always in the same position.
Details of the adjustment and control options on the underside (Pic.1).
1
Gain (Selection of MM/MC cartridge mode)
• MM operation:
Both ‘gain’ buttons in „off“ position (load impedance = 47kOhm)
• MC operation:
Both ‘gain’ buttons in „on“ position (load impedance = 500Ohm)
2
Input selector (selction between balanced / unbalanced mode)
• Balanced / symmetrical operation:
Both buttons in „off“ position
(use balanced XLR interconnects for input)
• Unbalanced / unsymmetrical operation:
Both buttons in „on“ position
(use unbalanced RCA / cinch interconnects for input)
3
Subsonic filter
•
Subsonic filter on:
Both „subsonic off/on“ buttons in „on“ position
•
Subsonic filter off:
Both „subsonic off/on“ buttons in „off“ position
Pic. 2: Underside view of the
balance V2 phono stage
1
2
2
3
3
4