background image

7

5. Attentions

Please read the manual carefully before use.
Please keep the manual after reading.

1.  Please place the machine in a safe place where it is not easily to be kicked down.

2.    Please turn off power and remove the plug from the socket, when the machine is 

not used for a long time. If you need to turn off power, make sure to pull out the 
plug part, and do not directly pull the power cord out.

3.     Do not continue to use, when the machine is broken or damaged due to other 

reasons, or the product operation fails. Do not place the power cord near or on a 
hot surface.

4.   Please close the doors and windows during the machine operation.

5.   Do not use the machine until it is properly installed.

6.   Do not use the machine in the environment of flammable or explosive gas.

7.     Do not leave the machine in the rain, or use it near water, such as laundry  

 

or other wet places.

8.   The machine must be placed vertically for use.

9.     Do not allow foreign matters to enter the air inlet or air outlet to avoid electric 

shock, fire or damage to the machine. Do not cover the machine.

10.  Place the machine close to the power outlet, and avoid using extension cable.

11.    If the plug and socket are loose, it may cause overheating or plug distortion.  

Please contact a qualified electrician to replace the loose or damaged socket.

12.    If the power cord is damaged, it must be replaced by the manufacturer, other 

service office or qualified personnel to avoid danger. Do not continue to use. Do 
not sit, stand or place heavy objects on the machine.

13.  Disconnect the power before repairing.

Summary of Contents for SafeAirFlow4













Reviews: