6
#
#
1
Inlet cap
5
Impellor
chamber O-ring
2
Front shell
6
Rear bearing
3
Back shell
7
Impellor
lid
4
Rotor
8
Motor body
See Figure 1.
3. Product description.
3.1 Product’s aims.
The product you bought is a magnetic drive centrifugal pump, operated by a watertight synchronous motor,
and is the most reliable small pump on the market.
3.2 Structure.
4. Technical data and characteristics.
See Table 2 in Figure 2.
The hydraulic parts used for the building of the system which shall include the product modify the performance
(head and flowrate) of the product.
5. Installation.
5.1 Storage characteristics and conditions.
The product must be stored in a dry place, protected from weather.
5.2 Transport.
Handle the product with care to avoid damages.
5.3 Positioning.
The product must be submersed in a home pond, in an easily accessed position.
It is advisable to take the following into account:
Dimensions and position of hydraulic parts.
•
Necessary free space.
•
Cable position.
•
Location of the power supply (power outlet).
•
Support and its location.
•
5.4 Connection and commissioning.
The product must be installed and operated by individuals with appropriate training. The electrical system
must meet current international and/or national regulations.
The product must be connected to a power outlet equipped with a residual current device, with a sensitivity
not lower than 30 [mA]. Before starting the product, check that your electrical system is equipped with this
safety device; if necessary, consult a technician.
Check that the product is compatible with the power supply it shall be connected to.
The power outlet must be appropriately far from the water, but easily accessible, so that the product can be
stopped quickly in failure situations. It is strictly forbidden to cut the wire and /or replace the power plug.
The power supply wire must be positioned so as to prevent possible damages, such as torsion and/or cuts.
5.5 Reinstallation and reuse.
Clean the product and the moving parts accurately before stopping the product for a while, such as, for
instance, during the winter months. Do not lubricate and/or use detergents and chemical cleaning products.
5.6 Disassembly and disposal.
Collecting recyclable material, both those used for packaging (cardboard, nylon, etc.) and those replaced
during routine and extraordinary maintenance is recommended. Suitable collection of waste material for
recycling, processing and environmentally compatible disposal contributes in avoiding possible negative
effects on the environment and health and promote the reuse and/or recycling of product materials.
Illicit product disposal by the user may be punishable by current international and/or national laws.
5.6.1 Collection of electric/electronic waste materials.
EU directive 2002/96/EC classifies this product as an electrical or electronic tool.
The barred bin symbol on the equipment or packaging indicates that the product must be separated from
other waste at the end of its working life. Therefore, the user must take equipment to electronic and electro-
technical waste collection centres at the end of its working life or return it to the dealer when purchasing
similar new equipment, on a one to one basis. Suitable collection of decommissioned equipment for
recycling, processing and environmentally compatible disposal contributes in avoiding possible negative
effects on the environment and health and promote the reuse and/or recycling of device materials. Illicit
product disposal by the user may be punishable by current national laws.