background image

5

2. General instructions and information for the user.

2.1 Guarantee.

2.1.1 Generalities.

i.   Pursuant to these provisions, the seller guarantees that the product mentioned in this guarantee (“the 

product”) is free of non-conformities at the time of its delivery.

ii.   The guarantee period for the product is 3 + 2 (5) years, starting from the moment the product is delivered 

to the purchaser. Parts subject to wear and tear, like rotors, are not covered by this guarantee.

iii.   The rotor comes with a 2 year guarantee against defects 
iv.   If the product cannot be repaired or replaced, the purchaser shall have the right to ask for a proportional 

price reduction or, if the non conformity is sufficiently serious, to terminate the sales agreement.

v.   Replaced or repaired parts under this guarantee shall not prolong the duration of the guarantee for the 

original product.

vi.  In order for this guarantee to be valid, the purchaser shall have to register the product purchase via the 

Clearpond website at www.clearpond.com.au

 

The guarantee will be honoured only if the unit is returned to your supplier complete, with your receipt 
or proof of purchase for the product 

vii.  If  the  purchaser  claims  product  non  conformities  after  more  than  six  months  from  product  delivery 

to  the  purchaser,  the  purchaser  shall  have  to  prove  the  existence  and  origin  of  such  claimed  non 
conformities.

viii.  This guarantee certificate shall in no way limit or prejudice the consumer’s rights pursuant to national 

mandatory regulations.

2.1.2 Special conditions.

i.   This guarantee refers to the product described in this customer manual.
ii.   This guarantee certificate is applicable exclusively in Australia.
iii.   In order for this guarantee to be valid, the purchaser shall have to follow strictly the manufacturer’s 

instructions  included  in  the  product  documentation,  in  so  far  as  they  are  applicable  to  the  relevant 
product range and model.

iv.   If  a  schedule  is  given  for  the  replacement,  maintenance  or  cleaning  of  some  product’s  parts  or 

components, the guarantee shall be considered valid only if said schedule has been followed correctly.

2.1.3 Limitations.

i.   This guarantee applies exclusively to sales to consumers, “consumers” being the people who buy the 

product for purposes that do not concern his or her professional activity.

ii.   No guarantee is given concerning normal wear and tear due to the use of the product. With regard to 

spares, components and/or replaceable materials or materials subject to wear and tear, such as rotors, 
bearings, lamps, o-rings, gaskets, sponges, cartridges, etc., any guarantee shall be enforced pursuant 
to the provisions of the product’s documentation.

iii.   The guarantee is not valid if the product:

a. has been handled incorrectly;
b. has been repaired, maintained or handled by unauthorised personnel, 
c. has had the electrical cable shortened
d. damaged / fault caused by calcium deposits and
e. has been repaired using non original spares.

2.2 Return Goods policy.

In the event of defects, flaws and malfunctions, the product should be returned to the dealer with the claims 
card filled out, when present.

2.3 General and safety instructions.

2.3.1 General instructions.

Clearpond is constantly improving its products. Clearpond reserves the right to make technical changes to 
the form and accessories of the products.
Please read carefully and hold on to this customer manual.
In the following paragraph you shall find all the necessary instructions to make the best possible use of this 
product, according to your needs, and to carry out the small cleaning and maintenance activities required by this 
kind of product. The references (#) in brackets refer to the components shown in the exploded view (see Figure 1).
Upon product receipt and/or purchase, check packaging integrity. The product must be accompanied by 
the customer manual. The customer manual must be complete.

2.3.2 Safety Instructions.

The  product  is  not  appropriate  for  physically,  sensory  or  mentally  disabled  persons  (and  children)  or  for 
people without the appropriate skills and knowledge, unless they are instructed on the use of the product 
and helped by someone who assumes responsibility for their safety. Monitor children and make
sure that they do not play with the product.
Never put your hands in the water if the pump is in operation.
Be sure to disconnect the power plug from the power outlet before operating on the product.

Summary of Contents for ETERNITY Series









Reviews:

Related manuals for ETERNITY Series