CLEAR DESIGN BL-3, General Manual

Page: 8 / 24

2 | INSERT BEAM LOCK
Adjust cable tray to approximate width of surface. Insert the screw
through the overlapping beam slots and into the black plastic
piece. Slightly tighten the screw with only a few turns.
DO NOT
fully tighten.
1 | ATTACH CABLE TRAY HANGERS AND END CAPS*
Align slots on the cable tray and secure with 2 bolts from the
bottom. These hangers will mount to the workstation. Insert Beam
Grommet Covers.
*NOTE: End Caps (BTEC) are optional, follow the same install
process with or without end caps.
C
A
B
L
E
T
R
AY
O
P
T
IO
NAL
5