#"
#"
5
|
MEASURE BEAM WIDTH AND LOCK
Measure from end leg to end leg until you find the approximate
width of the worksurfaces. Insert the screw through the
overlapping beam slots and into the black plastic piece. Slightly
tighten the screw but
DO NOT
fully tighten. Insert Beam Grommet
Covers.
4
|
BOLT DOWN BEAM-TO LEG LOCK PLATES
Note: The beam lock plates will not fit if there is a gap between the
beam and the leg.
FA
C
IN
G
B
L
AD
E
3
Summary of Contents for BL-3
Page 1: ...Includes Add ons A1 A2 A5 A6 A7 BLADE FACING WORKSTATION BL 3 General Guide See Master Plan...
Page 17: ...CONFERENCE BLADE FINAL STEPS Insert final wood screws and tighten beam locks 14...
Page 22: ...END PANELS BL 3 A7 PARTS LIST QTY PRODUCT CODE 1 BEP or BCEP Quantity is for one panel 19...
Page 24: ...210 648 2095 mycleardesign com 2021 Clear Design All rights reserved...
