R M - 7 0 2 T W O - C H A N N E L R E M O T E
2 - 7
• PROGRAM ENABLE B: Enables
program
audio channel B when set to
the
on
position.
• MOM TALK A: Setting the
momentary talk A
switch to the
on
position
will disable the latching function of the channel A
talk
button. In this
mode, the
talk
button must always be held in continuously while the
operator is talking on channel A.
• MOM TALK B: Setting the
momentary talk B
switch to the
on
position
will disable the latching function of the channel B
talk
button. In this
mode, the talk button must always be held in continuously while the
operator is talking on channel B.
• CALL ON TALK A: If the
call on talk A
switch is set to the
on
position,
a call signal will be placed on channel A whenever the
talk
function is
activated. This can be used to activate any
call
-activated functions
available on other stations.
• CALL ON TALK B: If the
call on talk B
switch is set to the
on
position,
a call signal will be placed on channel B whenever the
talk
function is
activated. This can be used to activate any
call
-activated functions
available on other stations.
• INTRPT ANNC: If the
interrupt announce
switch is set to the
on
position, pressing the
announce
button will disconnect the microphone
from the intercom line(s). This will allow announcements to be made
without being heard over the intercom channels.
• INTRPT EXT IFB: When the
hot mic
output is connected to
Clear-Com’s IFB system and the
interrupt external IFB
switch is set to
the
on
position, pressing a key on the IFB system will disconnect the
selected headset or panel microphone from the intercom line(s). This
allows the RM-702 microphone to be used to cue talent without
affecting intercom line communication.
• LONG LINE A: If a long cable run on channel A is unavoidable and
approaches 1,000 ft. (305 m) or more, set the
long line A option
switch
to the
on
position. The ability to set a sidetone null on channel A
depends upon properly setting this switch.
• LONG LINE B: If a long cable run on channel B is unavoidable and
approaches 1,000 ft. (305 m) or more, set the
long line B option
switch
to the
on
position. The ability to set a sidetone null on channel B
depends upon properly setting this switch.
• PROGRAM INTERRUPT A: Interrupts the
program
audio to channel A
while a
call
signal is sent on channel A (default).
You can change this option so that a
talk
signal, rather than
call
sig-
nal, interrupts the
program
audio on channel A. You do this by re-set-
ting an internal jumper. See the next section, “Re-Setting Program
Interrupt Options,” for instructions.
• PROGRAM INTERRUPT B: Interrupts the
program
audio to channel B
while a
call
signal
is sent on channel B (default).
