E a s i - P i c o U s e r G u i d e
3 6
voice transmits to the intercom line. When you release the button, your voice no
longer transmits to the intercom ine.
To "latch" the talk button "on" for hands-free use, quickly tap the button twice.
To unlatch the talk button, press the button again.
Talk Light (2)
The green talk light illuminates when you press or latch the talk button.
Volume-Control Knob (3)
The volume-control knob adjusts incoming volume level ("listen level").
There is a limiter built into the beltpack circuitry to prevent incoming volume
from exceeding a safe level.
Call Button (4)
When you press the call button, a call signal voltage is sent to all beltpacks and
panels on the intercom line.
The call light glows red to indicate both outgoing and incoming call signals.
Call Light (5)
The call light illuminates when the beltpack sends or receives a call signal.
Setup Information Window (6)
This feature is deactivated in Easi-PiCo mode.
Power Status Light (7)
An illuminated power status light indicates that the beltpack is connected to a
powered intercom line.
Note:
The light may illuminate even if the beltpack is receiving less than the
minimum 12 VDC required for beltpack operation
Summary of Contents for ECLIPSE EASI-PICO MATRIX
