Cleantecs SOLA-TECS W BJ 2010 Series, Operating Instructions Manual

Page: 35 / 72

35
BA 0304031 R00 2021-01
Commissioning
Risk of damage due to impurities in
the water
�A
Never operate the cleaner without a
high-pressure filter.
This prevents damage caused by
impurities in the water.
NOTICE
Also check:
�
the ropes and carabiners [6] of the
guying system
�
the drive, by lifting the cleaner
by the gearbox housing and turning
[7] the brush roller (chopping noise)
�
visual inspection of the bristles
on the brush roller
W / W Pro
Checking the high-pressure
filter in the connection pin of the
cleaner and pendulum tube
�
Pick up the socket wrench [8] . Insert
the socket wrench into the connec-
tor pin
[9] until it is positioned on the
high-pressure filter [10] . Turn the socket
wrench until it locks in place. Turn the
screw to the left until the high-pressure
filter
[10] can be loosened. Check the
high-pressure filter for contamination.
Clean or replace the high-pressure filter
if necessary. Screw the high-pressure
filter back into place by hand in a clock-
wise direction.
Repeat the entire process with the pen-
dulum tube
[11] .
Checking the high-pressure filter
[7]
[6]
[9]
[10]
[11]
[8]
The following
Tool is required
Info box